ZORROSEAL UPVC SOLVENT CEMENT is a clear in colour premium quality, high strength solvent cement made for the union of all size of UPVC/PVC Pipes and fittings. It helps in bonding both wet and dry UPVC/PVC Pipe surface.
It is a fast setting regular bodied solvent cement with low VOC emission. Our product provides good durability at the joints during cold water application. It is highly recommended for all grades & types of PVC pipe & fittings, drain, waste, vent pipe and potable water.
Cut the pipe straight, remove the burrs from the edge using file Clean the joining surface with clean dry cloth. Primer is strongly recommended for pipe size larger than “3” die. Shake can well before use. Apply a layer of solventcement in the fitting socket and layer of solvent cement to theend of the pipe. Immediately (while cement is wet) insert pipein the fitting socket and twist 1/8 to 1/4 turn until pipe reachesto the bottom of the socket. Hold pipe and fitting together for 30seconds. Wipe off excess cement with dry cloth. Allow 5 minutes for good handling strength and 60 minutes cure timefor good bond strength. Do not dilute cement with other solvent.
Extremely Flammable. Keep away from heat, spark, open flame & other sources of ignition. Vapor Harmful. May Irritates Skin or Eyes. So use gloves & safety glasses. In case of eyes or skin contact flush with plenty of water. If irritation persists, get medical assistance. Harmful if swallowed. Give two glasses of water. Do not induce vomiting. Contact Physician immediately.
50 ml,100 ml,250 ml,500 ml & 1 ltr Tin Pack.