Zorrobond-XP
Zorrobond-XP

AIPL ZORRO BOND-XP is a professional grade multi-purpose Synthetic Resin Adhesive in the form of a milky white viscous paste. It is ready to use and provides good performance with high water resistance. It also takes very little setting time. 

It is PVA based with a high solid content to provide unparalleled bonding strength. Its special formula provides long-lasting bonds on all types of wood and laminates that gives high strength adhesive bonding to a wide range of products.

  • Ready to use
  • Unparalleled bonding strength
  • Moderate resistant to water & heat
  • Higher coverage
  • Quick Setting
  • Prevents termite
  • Economical in long run
  • Furniture Industries (laminates, plywood, MDF, block board, hard board, particle board etc.)
  • Wooden framing.
  • Artifacts.
  • Paper, book binding, carton manufacturing.
  • Other allied industries.
  • Clean both the surfaces to be bonded.
  • Stir the container well before the application with a brush, roller, spreader or fingers.
  • Apply a thin coat of ZORRO BOND–XP on both or one surface (as per requirement).
  • Press the two surfaces together and keep under pressure till the adhesive dries completely.
  • Excess adhesive pressed outside the joints should be wiped out with a wet cloth.
  • In plastic containers 250gm, 500gm,1kg, 2kg
  • Bucket 5kg, 10kg, 20kg
  • Carbuoy 30kg, 50kg
  • Carbuoy (P) 50kg
  • Keep the container tightly closed when not in use.
  • Wash hands thoroughly after handling.
  • Store under ideal conditions in cool & dry place.
  • Lower high temperature storage should be avoided and the adhesives should preferably be stored within the temperature range +5°C up to +35°C.