• Premium quality, high strength solvent cement
• Can be used for bonding CPVC Pipes
• Can be used for a leakage-proof hot and cold water piping system
  fast setting-medium duty solvent cement
• Good durability at the joints against hot and cold running water in residential, commercial, industrial piping systems.
• Can also be used on copper tube size CPVC pipe and fittings.

Cut the pipe straight, remove the burrs from the edge using file Clean the joining surface with the clean dry cloth. Primer is strongly recommended for pipe size larger than “3” die. Shake can well before use. Apply a layer of solventcement in the fitting socket and layer of solvent cement to theend of the pipe. Immediately (while cement is wet) insert pipein the fitting socket and twist 1/8 to 1/4 turn until pipe reachesto the bottom of the socket. Hold pipe and fitting together for 30seconds. Wipe off excess cement with the dry cloth. Allow 5 minutes for good handling strength and 60 minutes cure timefor good bond strength. Do not dilute cement with other solvents.

Extremely Flammable. Keep away from heat, spark, open flame& other sources of ignition. Vapor Harmful. May Irritates Skin or Eyes. So use gloves & safety glasses. In case of eyes or skin contact flush with plenty of water. If irritation persists, get medical assistance. Harmful if swallowed. Give two glass of water. Do not induce vomiting. Contact Physician immediately.

50ml, 100ml, 250ml, 500ml & 1 L Tin can.