ZORROSEAL UPVC SOLVENT CEMENT is a clear in colour premium quality, high strength solvent cement made for the union of all size of UPVC/PVC Pipes and fittings. It helps in bonding both wet and dry UPVC/PVC Pipe surface.
It is a fast setting regular bodied solvent cement with low VOC emission. Our product provides good durability at the joints during cold water application. It is highly recommended for all grades & types of PVC pipe & fittings, drain, waste, vent pipe and potable water.

  • Regular-Bodied, Slow-SET clear cement for PVC pipe and fittings up to 8* diameter.
  • Specially formulated for low pressure application & Irrigation market.
  • Recommended for irrigation, drain, waste & vent application.
  • Recommended application temperature 5ºC (40°F) 0 43ºC(110ºF)
  • Cut the pipe straight, remove the burrs from the edge using file
  • Clean the joining surface with clean dry cloth.
  • Shake can well before use.
  • Shake can well before use.
  • Apply a layer of solventcement in the fitting socket and layer of solvent cement to theend of the pipe.
  • Immediately (while cement is wet) insert pipein the fitting socket and twist 1/8 to 1/4 turn until pipe reachesto the bottom of the socket.
  • Hold pipe and fitting together for 30seconds.
  • Wipe off excess cement with dry cloth.
  • Allow 5 minutes for good handling strength and 60 minutes cure timefor good bond strength.
  • Do not dilute cement with other solvent.
  • Extremely Flammable. Keep away from heat, spark, open flame& other sources of ignition.
  • Vapor Harmful.
  • May Irritates Skin or Eyes. So use gloves & safety glasses. In case of eyes or skin contact flush with plenty of water. If irritation persists, get medical assistance.
  • Harmful if swallowed. Give two glass of water. Do not induce vomiting. Contact Physician immediately.
  • 25 ml & 50ml Tube.
  • 50 ml,100 ml, 250 ml, 500 ml & 1l Tin can.